Stanley ID07810 HYDRAULIC IMPACT WRENCH

The ID07 can drive wood augers into the hardest salt-cured or creosote treated poles. The ID07 is a high torque impact wrench used for tightening and loosening nuts and driving lag bolts. Delivers impact torque of up to 500 ft. lbs. / 675 Nm. Available with friction ring or pin type socket retainer.

  • Chuck: 7/16″ Quick Change 
  • Toruqe: 500 ft/lbs (675 nm)
  • Input Pressure: 750-2000 psi
  • Weight: 7.2 lbs
  • Maximum Flow: 4-12 gpm
  • Large trigger, No Trigger Guard
  • Reverse-flow check valve prevents operation if the tool is plumbed backwards
  • Built in selector for Open Center or Closed Center systems
  • Feathering ON/OFF
  • 7/16 quick change chuck or 1/2 inch square drive
  • The ID07 can drive wood augers into the hardest salt cured or creosote-treated poles. Delivering impact torque of up to 500 ft.   lbs. 
  • The ID07 has the work-site proven swing-hammer mechanism   that will deliver high performance and long-term service. 
  • The integral Stanley Hyrevz™ gear motor is manufactured to exacting standards to deliver maximum efficiency 
  • The built-in reverse-check valve prevents operating the wrench when reverse- plumbed to the hydraulic system. Preventing   reverse operation ensures a long operating life for the hydraulic   seals. 
  • Setting the tool for open- or closed-center operation is as simple as opening or closing a valve.
ModelWeightFlow rangeWorking pressureTorqueCapacityMisc
ID078107.2 lbs / 3.3kg4-12 gpm / 15-45 lpm750-2000 psi550 ft lbs7/16″ QC Chuck

ID07815

7.2 lbs / 3.3kg

4-12 gpm / 15-45 lpm

750-2000 psi

550 ft lbs

7/16″ QC Chuck
Trigger
guard

ID07820

7.2 lbs / 3.3kg

4-12 gpm / 15-45 lpm

750-2000 psi

550 ft lbs

1/2″ QC Chuck
Pin Retainer

ID07830

7.2 lbs / 3.3kg

4-12 gpm / 15-45 lpm

750-2000 psi

550 ft lbs

1/2″ QC Chuck
Friction Ring